COLLEGE STATION, Texas — With a touch of inspiration from MacGyver, Aggies have developed a way to make medical protective gear from readily available materials.
A group of professors and graduate students from the College of Engineering at Texas A&M University are researching methods to construct desperately needed personal protection masks for medical personnel who have seen a depletion of resources as the number of COVID-19 cases increases.
John Criscione, a Texas A&M professor in the Department of Biomedical Engineering and a Johns Hopkins-educated medical doctor, said he and his colleagues are investigating a low-technology solution to a growing problem. Dr. Criscione and his team have figured out a way to build masks with materials such as air-conditioning filters, sheer curtains, staples and stretchable cords.
John Sharp, chancellor of The Texas A&M University System, said the Texas A&M community has a long tradition of helping society when it needs assistance the most.
“This is exactly the kind of Aggie ingenuity that has been evident on our campus for generations,” he said. See a video about the engineering professors and their efforts at “Masks“.
Also, see a video with a step-by-step guide concerning construction of protective masks at https://enmed.tamu.edu/DIYmasks/
Dr. Criscione said his team will be quantitatively testing do-it-yourself masks in the coming days. The team will continue its efforts to create a mask that has features similar to the N95 respirator, which is capable of filtering 95 percent of airborne particles, including viruses. (Surgical masks cannot block as much.)
“If the gap between supply and demand continues to worsen, and particularly our emergency medical colleagues are forced to use DIY masks, we want them to have technical guidance as they make their choices of materials and construction,” Dr. Criscione said. “We see this as our selfless service responsibility to the general public, as Aggies, and we are here to help.”
The project began after emergency room physicians asked Dr. Criscione to explore potential solutions, in case masks become unavailable. The result is a work-product that would be approved by MacGyver, the innovative namesake of an iconic late 1980s/early1990s TV show.
The prototype never was intended to join the supply-chain of approved personal protective equipment, or PPE, Dr. Criscione said. Rather, he said that the Aggie masks should be reserved for worse-case scenarios where overwhelmed hospitals “had no protective masks to use for life-saving procedures.”
Another group at Texas A&M’s College of Engineering is working on options to produce similar personal protective masks with 3D printers
About The Texas A&M University System
The Texas A&M University System is one of the largest systems of higher education in the nation with a budget of $6.3 billion. The System is a statewide network of 11 universities; a comprehensive health science center; eight state agencies, including the Texas Division of Emergency Management; and the RELLIS Campus. The Texas A&M System educates more than 151,000 students and makes more than 22 million additional educational contacts through service and outreach programs each year. System-wide, research and development expenditures exceeded $1 billion in FY 2019 and helped drive the state’s economy.
Contact: Laylan Copelin
Vice Chancellor of Marketing and Communications
(512) 289-2782 cell